Whole-house treatment workbench

PASS

Treatment type

Ion-exchange mode represents hardness reduction and includes brine, regeneration drain, and emergency overflow connections.

Equipment geometry

Vessel reference Main pipe centerline 1900 mm Tank rear clearance 180 mm Salt tank separation 140 mm Floor drain offset 700 mm Ceiling height 2440 mm

Main plumbing

Pipe size Pipe system

Regeneration drain Emergency overflow Outdoor hard branch Service zones

Geometry checkClear

Ceiling0 mm

Front aisle0 mm

Heater gap0 mm

Drain route0.0 m

Selected connection

Main shutoff

Close and verify the home main before cutting the supply. Local code may require a licensed installer or permit.

Installation path

Main shutoff and outdoor hard-water branch
4.5 x 20 in sediment prefilter
Three-valve bypass and resin vessel
Soft-water return to house and water heater
Brine, regeneration drain, overflow, and power

Model basis

The initial geometry follows a common US single-vessel garage installation with a separate salt tank. Vessel dimensions are physical references, not verified capacity claims. Supplier valve ports, resin volume, NSF certification, flow rate, pressure loss, drain limits, and local code still require confirmation.